Unicast Slave

Unicast Slave example configuration with contrived master tables.

This example will not work out of the box!

Refer to the Unicast Discovery Options section of ptp4l(8) for descriptions of the listed options.

[global]
#
# Request service for sixty seconds.
#
unicast_req_duration	60

#
# This table has four possible UDPv4 master clocks.
#
[unicast_master_table]
table_id		1
logQueryInterval	2
UDPv4			192.168.1.11
UDPv4			192.168.2.22
UDPv4			192.168.3.33

#
# This table has just one Layer-2 master clock.
#
[unicast_master_table]
table_id		2
logQueryInterval	2
L2			00:11:22:33:44:55

#
# This table would be for use with the P2P delay mechanism.
#
[unicast_master_table]
table_id		3
logQueryInterval	2
peer_address		192.168.4.44
UDPv4			192.168.4.44

#
# eth0 uses the master table with ID 1 over UDPv4.
#
[eth0]
unicast_master_table	1

#
# eth1 uses the master table with ID 2 over Layer-2.
#
[eth1]
network_transport	L2
unicast_master_table	2