Generic ts2phc Example

This example uses a PPS signal from a GPS receiver as an input to the SDP0 pin of an Intel i210 card. The pulse from the receiver has a width of 100 milliseconds.

Important! The polarity is set to both because the i210 always time stamps both the rising and the falling edges of the input signal.

Refer to ts2phc(8) for more information about the ts2phc options.

[global]
use_syslog		0
verbose			1
logging_level		6
ts2phc.pulsewidth	100000000
[eth6]
ts2phc.channel		0
ts2phc.extts_polarity	both
ts2phc.pin_index	0